Air supply & filter housings

Air supply & filter housings

HEPA supply air outlets with a gel-seal channel that locks the filter frame against the housing knife edge for a leak-tight seal, in top-feed and side-feed versions with an optional regulating damper.

Air supply & filter housings

Low-leakage airtight dampers for ventilation ducts in containment facilities, closing with a gas-tight seal so rooms can be isolated for decontamination and zero-leakage duty at a specified pressure difference.

Air supply & filter housings

Terminal HEPA filter housings for cleanroom ceiling grids, in top-adjustable, replaceable-media and disposable integrated versions; the housing, filter class and ceiling interface are fixed per configuration, and duct connection is done by the installer.

Air supply & filter housings

Standard HEPA supply outlets (terminal filter boxes with plenum and diffuser plate) for class 1000 to 100000 air-conditioning systems, sized by box, filter face, airflow and duct flange; installed in the ceiling by the buyer's contractor.

Air supply & filter housings

Fresh-air and exhaust filter cabinets for ventilation and make-up air: fresh-air cabinets, medium-efficiency exhaust boxes, activated-carbon adsorption boxes and multi-stage air filter boxes, sized by airflow and filter combination; connected to ductwork by the installer.

Air supply & filter housings

Ceiling-mounted laminar supply units for operating theatres, delivering HEPA-filtered air at a steady face velocity over the operating zone, sized by theatre type and ceiling opening.

Air supply & filter housings

Supply ceilings for clean operating theatres with a leak-protection layer below the filter bank, factory-made modules assembled on site, and filter replacement from above the ceiling without entering the protected room.

Air supply & filter housings

Terminal HEPA supply outlets with a mesh diffuser face for cleanrooms, combining plenum box, final filter and diffuser in one unit for new builds and retrofits.

Air supply & filter housings

Medium- and high-efficiency terminal grilles for cleanroom return and exhaust duct connections, sized and filtered per the room cleanliness class.